Tri-Five

Replace your bumper brackets and put new steel strength between you and the next car with this complete OE style 6-piece front bumper bracket set, will NOT work o "smoothie " style bumper. A new part is stronger than a straightened one, and that strength...

New reproduction of the originals, this 4 piece set does the front and rear bumper for one car. If you already purchased a smoothie bumper you will not need these because the bumpers have them already welded ion place. applications: 1955 chevy bel-air,...

New reproduction of the originals, use on the front or rear OE style bumpers. This pair does one bumper and is NOT for use on the smoothie style bumper. applications: 1955 Chevy Bel-Air, 210, 150 Both of the bumpers and brackets on your vehicle literally...

New reproductions of the original, show quality chrome. Hardware not included applications: 1956 Chevy Bel Air all models

These bumper bullet guards are made to go in our '57 front bumper kit so you know the form, fit and plating are top notch. Why re-plate and reuse your old bumper bullet guards on a new bumper when these are available. Will work on any 1957 classic Chevy...

New headlight bucket fits driver or passenger side order as needed. This assembly does not include the bulb or any wiring. applications: 1956 Chevy Bel Air all models

Repairs the entire front section of the fender extending back 3 5/8 in. back on upper headlight cap. This panel includes complete outer cap, hood bar flange and hood area edges along with inner headlight bucket flanges. Lh Rh= driver side applications: ...

new edp coated steel hood for all 1955 chevy's, no emblem holes for a smooth clean aftermarket look. applications: 1955 chevy all models When your looking for a replacement steel hood look no further than Body Shop Price, we offer a wide range of OE...

new edp coated steel hood for all 1956 chevy's, factory style replacement with cutout for hood ornament. applications: 1956 Chevy Bel Air all models When your looking for a replacement steel hood look no further than Body Shop Price, we offer a wide...

new edp coated steel hood for all 1956 chevy's, smoothie style for a clean aftermarket look. applications: 1956 chevy all models When your looking for a replacement steel hood look no further than Body Shop Price, we offer a wide range of OE style...

New edp coated reproduction of the originals for the driver and passenger side. applications: 1956 Chevy all models

New edp coated reproduction of the originals for the driver and passenger side. No wire holes. applications: 1957 Chevy all models

New edp coated reproduction of the original, Mounts A 6-Cylinder Style Radiator In Front Of Core Support Top Bar. applications: 1957 chevy all models

New 18 gauge die stamped custom smoothie panel bolts in just like the original. This panel eliminates fresh air flow at the kick panel vents. applications: 1955-1956 Chevy Bel Air all models

reproduction of the original. includes the entire upper cowl, windshield opening & defroster openings. has 1955 style defroster slots but will also fit 1956. Includes windshield glass flange. applications: 1955-1956 Chevy all models

Braces the inner cowl / kick panel area to the front floor, sold a pair for the driver and passenger side. applications: 1955 Chevy all models 1956-1957 Chevy convertible

Braces the inner cowl / kick panel area to the front floor. Rh= passenger side applications: 1955 Chevy all models 1956-1957 Chevy convertible

Braces the inner cowl / kick panel area to the front floor. Lh= driver side applications: 1955 Chevy all models 1956-1957 Chevy convertible

new reproduction a-pillar with outer cowl side assembled. Rh= passenger side applications: 1955-1956 2 door sedans & 2 door wagons

new reproduction a-pillar with outer cowl side assembled. Lh= driver side applications: 1955-1956 2 door sedans & 2 door wagons

New reproduction of the original. includes outer cowl side with hinge plate pockets. Rh= passenger side applications: 1957 Chevy Bel air all models

New reproduction of the original. includes outer cowl side with hinge plate pockets. Lh= driver side applications: 1957 Chevy Bel air all models

Original design transmission mounts need to replaced regularly, or they can sag and sometimes break.  These quality reproductions will assure your transmission stays in place for years to come. Will work on the driver and passenger side of any...

high quality original gauge steel. includes all floor braces, floor sheet metal & inner rockers. one-piece stamped as original. no seams to finish. includes blind nuts for seat tracks. fits all 2 & 4 door sedans, wagons, nomads & sedan...

high quality original gauge steel. includes all floor braces, floor sheet metal & inner rockers. one-piece stamped as original. no seams to finish. includes blind nuts for seat tracks. includes rear seat reinforcement & seat installation channel...

high quality original gauge steel. includes all floor braces, floor sheet metal & inner rockers. one-piece stamped as original. no seams to finish. includes blind nuts for seat tracks. includes rear seat reinforcement & seat installation channel...

die formed and edp coated-complete with inner rocker panels & underside braces applications: 1956-1957 chevy 4 door hardtop Floor pans take a beating from the elements, and tend to trap moisture coming up from the ground as well as moisture dripping...

New die stamped front cab floor patch panels, these are the sections of floor located directly in front of the driver and passenger seat and meets the firewall factory seam on the flat. This 4 piece set includes the body mount floor braces located...

New die stamped edp coated front and rear cab floor patch panels. The front floors cover from the front edge of the front seat and meet the factory seam at the base of the firewall, the rear sections of the floor are located where the passengers would...

New die stamped front cab floor patch panel, this is the section of floor located directly in front of the driver and passenger seat and meets the firewall factory seam on the flat. applications: 1955-1957 Chevy 1955-1957 Nomad 1955-1957 Station Wagon...

New die stamped front cab floor patch panel, this is the section of floor located directly in front of the passenger seat and meets the firewall factory seam on the flat. 24 in. wide x 19 in. long. 19 inches from the firewall seam to the front edge of...

New die stamped front cab floor patch panel, this is the section of floor located directly in front of the driver seat and meets the firewall factory seam on the flat. Measures 24 in. wide x 19 in. long. 19 inches from the firewall seam to the front edge...

New die stamped rear cab floor patch panel, these are the sections of floor the rear seat passengers would rest their feet on. Sold as a pair for the driver and passenger side. applications: Except Convertible 1955-1957 Chevy Bel Air 1955-1957...

New die stamped rear cab floor patch panel, this is the section of floor the rear seat passenger behind the front seat passenger would rest their feet. Rh= passenger side applications: Except Convertible 1955-1957 Chevy 1955-1957 Nomad 1955-1957 Station...

New die stamped rear cab floor patch panel, this is the section of floor the passenger behind the driver in the rear seat would rest their feet. Rh= passenger applications: Except Convertible 1955-1957 Chevy 1955-1957 Nomad 1955-1957 Station Wagon Floor...

Reproduction of the original, welds to the underside of the floor just in front of the wheel wells. under rear seat. fits all body styles. applications: 1955-1957 Chevy Bel air 210 150 Nomad

Steel Reproductions Of Original, Correct For 1956-57. Remove Upper Cover Top Close-Out For 1955 models applications: 1956-1957 Chevy Convertible Can Fit: 1955 Chevy Convertible (modify top section)

These inner rocker braces weld at the bottom of the rocker panel and at the floor to cover the opening in the back or the rocker panel. Fits all body styles 2 door and 4 door Lh Rh= driver and passenger side included applications: 1955-1957 Chevy Bel Air...

This inner rocker brace welds in at the bottom of the rocker panel and at the floor to cover the opening in the back or the rocker panel. Fits all body styles 2 door and 4 door Rh= passenger side applications: 1955-1957 Chevy Inner rocker panels take a...

This inner rocker brace welds in at the bottom of the rocker panel and at the floor to cover the opening in the back or the rocker panel. Fits all body styles 2 door and 4 door Lh= driver side applications: 1955-1957 Chevy Inner rocker panels take a...

Kit includes factory style inner rockers and outer rockers, the outer rocker panels have the fender brackets and forward end caps already installed. will work on any 1955 classic Chevy 2 door. Lh Rh= driver and passenger side included applications: 1955...

These factory style rocker panels have the fender brackets and forward end caps already installed. will work on any 1955 classic Chevy 2 door. Lh Rh= driver and passenger side included applications: 1955 Chevy 2 door 1955 Chevy Nomad Rocker panels take a...

This factory style rocker panel has the fender bracket and forward end cap already installed. Will work on any 1955 Classic Chevy 2 door. Rh= passenger side applications: 1955 Chevy 2 door models Rocker panels take a beating from the elements and road...

This factory style rocker panel has the fender bracket and forward end cap already installed. Will work on any 1955 Classic Chevy 2 door. Lh= driver side applications: 1955 Chevy 2 door models   Rocker panels take a beating from the elements and...

Kit includes factory style inner rockers and outer rockers, the outer rocker panels have the fender brackets and forward end caps already installed. will work on any 1956 classic Chevy 2 door. Lh Rh= driver and passenger side included applications: 1956...

These factory style rocker panels have the fender brackets and forward end caps already installed. will work on any 1956 classic Chevy 2 door. Lh Rh= driver and passenger side included applications: 1956 Chevy Bel Air 2 door 1956 Chevy Nomad Rocker...

This factory style rocker panel has the fender bracket and forward end cap already installed. Will work on any 1956 Classic Chevy 2 door. Rh= passenger side applications: 1956 Chevy 2 door models Rocker panels take a beating from the elements and road...

This factory style rocker panel has the fender bracket and forward end cap already installed. Will work on any 1956 Classic Chevy 2 door. Lh= driver side applications: 1956 Chevy 2 door models Rocker panels take a beating from the elements and road...

Kit includes factory style inner rockers and outer rockers, the outer rocker panels have the fender brackets and forward end caps already installed. will work on any 1957 classic Chevy 2 door. Lh Rh= driver and passenger side included applications: 1957...

These factory style rocker panels have the fender brackets and forward end caps already installed. Will work on any 1957 classic Chevy 2 door. Lh Rh= Driver and passenger side included applications: 1957 Chevy Bel Air 2 door 1957 Chevy Nomad Rocker...

New die formed and edp coated replacement door shell. Lh= driver side applications: 1955 Chevy Bel Air 2 Door Hardtop 1957 Chevy Bel Air 2 Door Hardtop  

New complete inner and outer door assembly, includes all correct mounting points & holes except for stainless trim holes. Rh= passenger side applications: 1955-1957 Chevy Nomad

New complete inner and outer door assembly, includes all correct mounting points & holes except for stainless trim holes. Lh= driver side applications: 1955-1957 Chevy Nomad

New heavy gauge edp coated reproductions. sold as a 4 piece set. applications: 1955-1957 Chevy all 2 door body styles 1955-1957 Chevy all 4 door body styles (front door)

New heavy gauge edp coated reproduction fits upper or lower on the passenger side front door. Sold as each Rh= passenger side applications: 1955-1957 Chevy all 2 door body styles 1955-1957 Chevy all 4 door body styles (front door)

New heavy gauge edp coated reproduction fits upper or lower on the driver side front door. Sold as each Lh= driver side applications: 1955-1957 Chevy all 2 door body styles 1955-1957 Chevy all 4 door body styles (front door)

reproduction of the original. includes complete regulator with nylon rollers & springs. Rh= passenger side applications; 1955-1957 Chevy 2 door sedan

reproduction of the original. includes complete regulator with nylon rollers & springs. Lh= driver side applications: 1955-1957 Chevy 2 door sedan

reproduction of the original. includes complete vent window assembly with fuzzy glass run channel, stainless trim on glass & vent window rubber seals. includes chrome vent window frame with latch and CLEAR glass. Lh Rh= driver and passenger side...

New reproduction of the originals. Includes complete vent window assembly with fuzzy glass run channel, stainless trim on glass & vent window rubber seals. includes chrome vent window frame with latch and clear glass. Lh Rh included: driver and...

reproduction of the original. includes complete vent window assembly with fuzzy glass run channel, stainless trim on glass & vent window rubber seals. includes chrome vent window frame with latch and tinted glass. LH Rh= driver and passenger...

New reproduction of the original. for all 2 & 4 door sedans. applications: 1955-1957 Chevy Bel air Rust doesn’t sleep. It forms on almost every vehicle and on every exterior steel body panel from the floor to the roof. If you’re vehicle...

reproduction of the original. fully assemble and fixture welded. includes complete side rails including doglegs by rear window opening. applications: 1955-1957 chevy 2 door hardtop

reproduction of the original. includes supporting under structure & rear glass opening. surface requires rear glass channel flange. applications: 1955-1957 chevy 2 & 4 door sedan

Reproduction of the original. welds to rear deck filler panel / package tray to create the rear glass gasket flange. Fits 2 door hardtop, 2 door sedan, 4 door hardtop and 4 door sedan. Does not fit convertible or wagon models. applications: 1955-1957...

Reproduction Of The Original Steel Rear Quarter Panel, Not Drilled For Side Trim Or Window Trim - 210 & Bel Air Owners Must Drill Their Own Trim Holes. Complete Quarter Includes Complete Door Jamb & Upper Trunk Opening Also Includes Rear Quarter...

Reproduction Of The Original Steel Rear Quarter Panel, Not Drilled For Side Trim Or Window Trim - 210 & Bel Air Owners Must Drill Their Own Trim Holes. Complete Quarter Includes Complete Door Jamb & Upper Trunk Opening Also Includes Rear Quarter...

reproduction of the original steel rear quarter panel. not drilled for side trim, allows use on 150, 210 or bel air. crown molding holes are punched for 150 or 210. complete quarter includes complete door jamb & upper trunk opening. includes b-pillar...

Reproduction of the original steel rear quarter panel. not drilled for side trim, allows use on 150, 210 or bel air. crown molding holes are punched for 150 or 210. complete quarter includes complete door jamb & upper trunk opening. includes b-pillar...

New factory style bed floor cross sills, Short bed uses 3 and long bed uses 5. Each sill measures 71 1/4 in. Long and exactly 3 inches tall. Gauge of metal: 14g. applications: Fleetside bed only 1973-1986 Chevy & GMC pickup c/k series 1987-1991 Chevy...

Bed Reinforcement Strip - 73-87 Chevy GMC C/K Stepside Pickup (use 2 on SWB & LWB) Bed reinforcement strip for 73-87 Chevrolet / GMC Fullsize Truck's with a stepside bed. Starting at the front bed panel and moving towards the tailgate, this is the...

New factory style bed floor cross sills, short bed uses 3 and long bed uses 5. Measures: 38" L x 5" W x 6" H Gauge of metal: 16g. applications: stepside bed only 1973-1986 Chevy & GMC pickup c/k series 1987-1991 Chevy & GMC pickup r/v series

The Complete Door Jamb From Top Of Rocker To Base Of Glass Area. Can work on the driver and passenger side of any 1955-1957 classic Chevy 2 Door Sedan, Nomad, and 2 Door Wagon. Note: The Nomad Did Not Have The Squares And The Shape Above The Striker...

The Complete Door Jamb From Top Of Rocker To Base Of Glass Area. Can work on the driver side of any 1955-1957 classic Chevy 2 Door Sedan, Nomad, and 2 Door Wagon. Note: The Nomad Did Not Have The Squares And The Shape Above The Striker Plate Is not the...

The Complete Door Jamb From Top Of Rocker To Base Of Glass Area. Can work on the passenger side of any 1955-1957 classic Chevy 2 Door Sedan, Nomad, and 2 Door Wagon Note: The Nomad Did Not Have The Squares And The Shape Above The Striker Plate Is not the...

widens stock steel inner trunk wells by 2-5/8" per side, allows use of 13" (335 mm) wide tires when used with rear spring pocket kit. use on all hardtop and sedan body styles, can also be custom fit to convertibles. applications: 1955-1957 Chevy Bel...

New reproduction of the original. the complete inner quarter structure from door jamb to rear trunk opening. includes inner wheel tub and complete outer wheelhouse. does not include b-pillar. Rh= passenger side applications: 1955-1957 Chevy Bel Air 2...

New reproduction of the original. the complete inner quarter structure from door jamb to rear trunk opening. includes inner wheel tub and complete outer wheelhouse. does not include b-pillar. Lh= driver side applications: 1955-1957 chevy 2 door hardtop

new reproduction cargo floor without braces & without extensions applications: 1955-1957 chevy nomad 1955-1957 chevy wagon 1955-1957 chevy sedan delivery

Properly notched and flanged for easy installation, spare tire well is deleted. Fits all non-wagon body styles including convertible. Allows use of 13' wide tires when used with rear spring pocket kit. Includes All Braces: rear body panel  brace,...

repairs the entire cargo floor on all models except nine-passenger wagon. includes entire cargo floor from rear of back seat to tail pan, also includes all braces, supports, shock mounts and spare tire well applications: 1955-1957 nomad 1955-1957 station...

die formed and edp coated. braces and spare tire well included also includes gas tank straps. applications: 1955-1957 chevy hardtop/sedan

die formed and edp coated. braces and spare tire well included. includes gas tank straps applications: 1955-1957 chevy convertible

Die formed and edp coated, this 2 piece kit includes the 11 inch trunk floor section (11 in. x 55 in.) and the body mount brace that attaches below it at the back edge. This kit repairs the most common issues in the back end of all tri-fives. fits all...

Die formed and edp coated, the 3 piece rear body panel kit includes the 11 inch trunk floor section (11 in. x 55 in.), the body mount brace that attaches below it and the rear tail panel/body panel. This kit repairs the most common issues in the back end...

Die formed and edp coated, the 3 piece kit includes the 11 inch trunk floor section (11 in. x 55 in.), the body mount brace that attaches below it and the rear tail panel/body panel. This kit repairs the most common issues in the back end of all...

Die formed and edp coated, the 3 piece rear body panel kit includes the 11 inch trunk floor section (11 in. x 55 in.), the body mount brace that attaches below it and the rear tail panel/body panel. This kit repairs the most common issues in the back end...

New reproduction of the original, welds to underside of trunk floor at rear of body, fits all body styles except wagons and Nomads. applications: 1955-1957 Chevy Bel Air

New die formed and edp coated reproduction of the originals. The rear body panel is the sheetmetal below the deck lid and makes up the lower trunk opening. The quarter patch panels repairs the lower inner "fin" below the taillight over to the trunk...

New reproduction of the original, edp coated tailgate shell. applications: 1955-1957 Chevy Nomad

New die formed and edp coated reproduction of the original. this is the sheetmetal below the deck lid and makes up the lower trunk opening. fits all body styles except nomad, station wagon and sedan delivery.45 1/2 in. long x 5.25 in...

New die formed and edp coated reproduction of the originals. The rear body panel is the sheetmetal below the deck lid and makes up the lower trunk opening. The quarter patch panels repairs the lower inner "fin" below the taillight over to the trunk...

Fits between outer quarter panel and trunk lid, includes trunk opening flange and tail panel seam. Rh= passenger side applications: 1957 Chevy Bel Air 210 150, 2 door and 4 door models except wagons.

Fits between outer quarter panel and trunk lid, includes trunk opening flange and tail panel seam. Lh= driver side applications: 1957 Chevy Bel Air 210 150, 2 door and 4 door models except wagons.  

Reproduction three-piece chrome rear bumper for the 1955 Chevrolet Nomad and Station Wagons Models. Also fits non-wagons if you wish to remove the license plate form the trunk lid. bumpers are made from heavy gauge steel and feature OE quality...