Chevy Chevelle

Auto Metal Direct (AMD) hoods are designed to be a direct bolt-on replacement to your vehicles stock hood. All applications utilize your vehicles stock hinges and latch assembly. Each hood features a fully finished, factory style underside. Unlike...

Does not include the steel dash panel behind the windshield but includes the base channel that is also commonly replaced at the same time. applications: 1968-1969 chevelle / elcamino 1968-1969 gto / lemans / tempest 1968-1969 skylark / gran sport...

This 2 piece combo is sure to solve the majority of your rust problems on the outside of the windshield, kit includes the upper section of the cowl panel and the windshield base channel that the glass rest on when installed.  does not include the...

does not include the steel dash panel behind the windshield. upper section of the cowl panel. applications: 1970-1972 chevelle / elcamino 1970-1972 gto / lemans / tempest 1970-1972 skylark / gran sport 1970-1972 cutlass / 442 1970-1972 monte carlo

Complete inner and outer factory style cowl side shoulder, 2 piece set. Rh= passenger side applications: 1968-1972 chevelle/malibu 1968-1972 elcamino 1970-1972 monte carlo 1968-1972 skylark 1968-1972 gto / lemans / tempest 1968-1972 cutlass/442

Complete inner and outer factory style cowl side shoulder, 2 piece set. Lh= driver side applications: 1968-1972 chevelle/malibu 1968-1972 elcamino 1970-1972 monte carlo 1968-1972 skylark 1968-1972 gto / lemans / tempest 1968-1972 cutlass/442  

Complete oe style coverage for replacement of entire floor. this one-piece pan has all the shapes, contours and holes as original. includes floor pan braces, and seat belt provisions already welded in place and features the inner rocker already installed...

complete oe style coverage for replacement of entire floor. this one-piece pan has all the shapes, contours and holes as original. includes floor pan braces, and seat belt provisions already welded in place inner and outer rockers are already welded onto...

complete oe style coverage for replacement of entire floor. this one-piece pan has all the shapes, contours and holes as original. includes floor pan braces, and seat belt provisions already welded in place inner and outer rockers are not on this floor...

Replace your rusted out floor pans with our 4 piece kit, this includes front driver and passenger side floor pan with extended toe boards and both driver and passenger side rear floors. applications: applications: 1968-1972 Chevelle / Malibu 1968-1972...

New complete under rear seat floor pan section, this panel repairs the entire width of the floor and meets the lip on the front edge of the truck floor. applications: 1968-1972 gto / lemans / tempest 1968-1972 chevelle & malibu 1968-1972 buick...

this front floor brace spans from the driver side inner rocker panel to passenger side inner rocker panel. applications: 1970-1972 gto / lemans / tempest 1970-1972 chevelle / el-camino 1970-1972 skylark / special 1970-1972 cutlass / f85 / 442 1970-1972...

this rear floor brace spans from the driver side inner rocker panel to passenger side inner rocker panel. applications: 1970-1972 gto / lemans / tempest 1970-1972 chevelle / el-camino 1970-1972 skylark / special 1970-1972 cutlass / f85 / 442 1970-1972...

New die stamped factory style outer rocker panel for g-body 2 door models. 66 in. long. die formed & edp coated. Lh Rh= driver and passenger side applications: 1978-1988 cutlass 1978-1987 lemans / grand am /grand prix 1978-1983 malibu 1978-1988 monte...

New die stamped reproduction door hinges for the driver and passenger side. applications: 1967 camaro 1967 firebird 1966-1967 gto / lemans / tempest 1966-1967 chevelle 1966-1967 elcamino 1966-1967 skylark & special 1966-1967 cutlass & f85

Replace your worn or damaged window regulator with this new exact reproduction of the original. For 2 door hardtop & convertible Lh Rh= driver and passenger side applications: 1968-1972 Chevelle 2 door hardtop & convertible 1968-1972 GTO / Lemans...

Replace your worn or damaged window regulator with this new exact reproduction of the original with nylon roller riveted in place. For 2 door hardtop & convertible Rh= passenger side applications: 1968-1972 Chevelle 2 door harstop and...

Replace your worn or damaged window regulator with this new exact reproduction of the original with nylon roller riveted in place. For 2 door hardtop & convertible Lh= driver side applications: 1968-1972 Chevelle 2 door harstop and...

it is often easier to replace the entire roof skin than to repair rusted areas. if you have rust under a vinyl top this item can be a real time saver. made to oe specifications this skin covers the entire roof area and mates with the a pillars and...

it is often easier to replace a roof skin than to repair rusted areas.  if you have rust under a vinyl top this part is a real time saver.  made to oe specification, this skin covers the entire roof area and mates to the a pillars and...

fits on the side of the package tray on the Driver & Passenger side, often rusted in the corners where it meets the panels on the side of the body. if you replace your package tray you will also need this part. sold as a pair for the driver and...

Fits on the side of the package tray on the Passenger side often rusted in the corners where it meets the panels on the side of the body. if you replace your package tray you will also need this part. Rh= passenger side applications: Does NOT Fit...

Fits on the side of the package tray on the Driver side often rusted in the corners where it meets the panels on the side of the body. if you replace your package tray you will also need this part. Lh= driver side applications: Does NOT Fit...

Includes inner reinforcement support welded in place. Will not fit 300 series or sedan models applications: 1964-1965 Chevelle & Malibu

trunk floor is full factory size, and includes the over axle brace, both gas tank braces, the 2 rear body mount braces, and the rear cross rail brace attached. applications: 1966-1967 chevelle & malibu

This kit includes the 3 trunk floor repair sections for all 64-67 Chevelle and Malibus models except wagons. applications: 1964-1967 Chevelle & Malibu

New die stamped trunk floor patch panel for the passenger side, includes drop down flange to meet the drop off. Fits all 2/4 door hardtop, coupe, 2/4 door sedan. 23 in. wide x 42 in. long Rh= passenger side applications: 1964-1967 Chevelle & Malibu

this kit includes the 3 trunk floor repair sections, 2 gas tank braces and both trunk floor body mount braces located at the back edge of the rear inner wheelhouse. applications: 1964-1967 chevelle & malibu

New die stamped trunk floor patch panel for the passenger side, includes drop down flange to meet the drop off. Fits all 2/4 door hardtop, coupe, 2/4 door sedan. 23 in. wide x 42 in. long Lh= driver side applications: 1964-1967 Chevelle & Malibu

New die stamped trunk floor patch panel for the passenger side, includes drop down flange to meet the drop off. Fits all 2/4 door hardtop, coupe, 2/4 door sedan. 20 in. wide x 42 in. long applications: 1964-1967 Chevelle & Malibu

"a-body trunk floor sections" these trunk floors may not match the original body lines on your specific model. best used for minor rust repair when original appearance is desired. kit includes: 2 body mounts, 2 gas tank mounts & 3 trunk floor repair...

"a-body trunk floor section" this trunk floor may not match the original body lines on your specific model. best used for minor rust repair when original appearance is desired. 21 in. wide x 37 in. long Rh= passenger side applications: 1970-1972 monte...

"a-body trunk floor section" this trunk floor may not match the original body lines on your specific model. best used for minor rust repair when original appearance is desired. 21 in. wide x 37 in. long Lh= driver side applications: 1970-1972 monte carlo...

"a-body trunk floor section" this trunk floor may not match the original body lines on your specific model. best used for minor rust repair when original appearance is desired. 19 in. wide x 37 in. long applications: 1970-1972 monte carlo 1968-1972...

This is the panel and brace forming the rh edge by the trunk floor drop off. located on the passenger side next to the spare tire well directly above the rear frame rail. Rh= passenger side applications: 1978-1988 Cutlass1978-1987 Lemans Grand Am Grand...

This is the panel and brace forming the lh edge by the trunk floor drop off. located on the driver's side behind the rear wheel. Lh= driver side applications: 1978-1988 Cutlass1978-1987 Lemans Grand Am Grand Prix1978-1983 Malibu1978-1988 Monte...

New trunk floor brace with caged nut for the body bushing located at the back corner of the inner wheelhouse. Rh= passenger side applications: 1964-1967 chevelle & malibu 1964-1967 buick special & skylark 1964-1967 cutlass, 442 &...

New trunk floor brace with caged nut for the body bushing located at the back corner of the inner wheelhouse. Lh= driver side applications: 1964-1967 chevelle & malibu 1964-1967 buick special & skylark 1964-1967 cutlass, 442 & f-85 1964-1967...

These fuel tank braces are welded to the underside of the trunk floor and supports the fuel tank straps. This 2 piece set is enough for one GM A-Body car. applications: 1970-1972 monte carlo 1968-1972 chevelle / malibu 1968-1972 tempest / gto / lemans...

trunk floor body mount brace located on the underside of the trunk along the outer edge of the gas tank. Rh= passenger side applications: 1970-1972 monte carlo 1968-1972 chevelle / malibu 1968-1972 tempest / gto / lemans 1968-1972 f-85 / cutlass /...

trunk floor body mount brace located on the underside of the trunk along the outer edge of the gas tank. Lh= driver side applications: 1970-1972 monte carlo 1968-1972 chevelle / malibu 1968-1972 tempest / gto / lemans 1968-1972 f-85 / cutlass /...

This fuel tank brace is welded to the underside of the trunk floor and supports the fuel tank straps. 2 required per car. Not for Wagon models. applications: 1970-1972 monte carlo 1968-1972 chevelle / malibu 1968-1972 tempest / gto / lemans 1968-1972...

This is a set of trunk floor pan to frame rail brace repair plates. this kit is to be used to repair the rusted areas where the trunk floor attaches to the frame rails behind the rear wheels. complete with bolts. 2 door coupe only...

New correct reproduction of the original tail panel section and weatherstrip channel. Fits all models except wagons. applications: 1964-1965 Chevelle & malibu

new full replacement tail light panel assembly for a full rear end restoration. includes tail light extensions & reinforcements attached.fits: 1965 chevelle & malibu*except wagon

New correct reproduction tail pocket with weatherstrip gutter channel. includes tail light bucket reinforcements attached. Fits non-wagon models. Rh= passenger side applications: 1965 Chevelle & Malibu  

New correct reproduction tail pocket with weatherstrip gutter channel. includes tail light bucket reinforcements attached. Fits non-wagon models. Lh= driver side applications: 1965 Chevelle & Malibu

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as all parts are designed to be a...