Chevelle

New trunk latch support welds to the center section of the rear body panel, your trunk lock attaches here. Fits all models except wagon. applications: 1964-1965 Chevelle & Malibu

New trunk latch support welds to the center section of the rear body panel, your trunk lock attaches here. Fits all models except wagon. applications: 1968-1969 Chevelle / Malibu

New trunk latch support welds to the center section of the rear body panel, your trunk lock attaches here. Fits all models except wagon. applications: 1970-1972 Chevelle / Malibu

New trunk floor brace with caged nut for the body bushing located at the back corner of the inner wheelhouse. Rh= passenger side applications: 1964-1967 chevelle & malibu 1964-1967 buick special & skylark 1964-1967 cutlass, 442 &...

New trunk floor brace with caged nut for the body bushing located at the back corner of the inner wheelhouse. Lh= driver side applications: 1964-1967 chevelle & malibu 1964-1967 buick special & skylark 1964-1967 cutlass, 442 & f-85 1964-1967...

exact reproduction of the original, 2 required per car applications: 1964-1967 chevelle & malibu

These fuel tank braces are welded to the underside of the trunk floor and supports the fuel tank straps. This 2 piece set is enough for one GM A-Body car. applications: 1970-1972 monte carlo 1968-1972 chevelle / malibu 1968-1972 tempest / gto / lemans...

trunk floor body mount brace located on the underside of the trunk along the outer edge of the gas tank. Rh= passenger side applications: 1970-1972 monte carlo 1968-1972 chevelle / malibu 1968-1972 tempest / gto / lemans 1968-1972 f-85 / cutlass /...

trunk floor body mount brace located on the underside of the trunk along the outer edge of the gas tank. Lh= driver side applications: 1970-1972 monte carlo 1968-1972 chevelle / malibu 1968-1972 tempest / gto / lemans 1968-1972 f-85 / cutlass /...

This fuel tank brace is welded to the underside of the trunk floor and supports the fuel tank straps. 2 required per car. Not for Wagon models. applications: 1970-1972 monte carlo 1968-1972 chevelle / malibu 1968-1972 tempest / gto / lemans 1968-1972...

this fuel tank brace is welded to the underside of the trunk floor and supports the fuel tank straps. 2 required per car sold as each. applications: 1973-1977 Monte Carlo 1973-1977 Chevelle / Malibu 1973-1977 Lemans 1973-1977 Cutlass / 442  

new gas tank support set with mounting hardware as pictured applications: 1964-1967 Elcamino 1964-1967 Chevelle wagon

Use when replacing quarter panels, attaches to the top of the quarter panel in the trunk opening to create the weatherstrip channel. This lower gutter attaches specifically to the bottom of the upper gutter and ties the tail panel and end of the rear...

Use when replacing quarter panels, attaches to the top of the quarter panel in the trunk opening to create the weatherstrip channel. Fits all 2 door and 4 door models. applications: 1964-1965 GTO / lemans / tempest 1964-1965 Chevelle 1964-1965 Skylark...

Use when replacing quarter panels, attaches to the top of the quarter panel in the trunk opening to create the weatherstrip channel. This lower gutter attaches specifically to the bottom of the upper gutter and ties the tail panel and end of the rear...

Use when replacing quarter panels, attaches to the top of the quarter panel in the trunk opening to create the weatherstrip channel. Fits all 2 door and 4 door models. applications: 1966-1967 GTO / Lemans / Tempest 1966-1967 Chevelle 1966-1967 Skylark...

Use when replacing quarter panels, attaches to the top of the quarter panel in the trunk opening to create the weatherstrip channel. Fits all 2 door and 4 door models. applications: 1968-1972 Chevelle / Malibu 1970-1972 Skylark 1970-1972 Monte Carlo The...

trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

Trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

Trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

Trunk floor extensions also known as drop-offs are the steel panels that fill between the side of the trunk floor and the lower rear bottom of the quarter panel.these are commonly rusted out, especially when water leaked into the trunk from the back...

new edp coated trunk lid assembly ready sand prime and paint, bolt on installation. fits: 1966-1967 chevelle & malibu

 new edp coated trunk lid assembly ready sand prime and paint, bolt on installation. fits all 2 door body styles. fits: 1968-1972 chevelle fits: 1970-1972 monte carlo fits: 1970-1972 buick skylark

New reproduction trunk lid hinges are sold as a pair for the driver and passenger side. These do not include the torsion rod or the lower brace that welds to the inner wheelhouse applications: 1968-1972 Chevelle & Malibu fits all models except...

New edp coated trunk lid hinges for the driver and passenger side on all convertible models. applications: 1970-1972 Chevelle & Malibu

this trunk lid catch is used on all gm models to latch the trunk lid and make the adjustment in the catch. bolts to the striker support.fits: 1964-70 chevelle & malibufits: 1964-70 gto / lemans / tempestfits: 1964-70 cutlassfits: 1964-70 skylark...

New heavy gauge reproduction trunk floor body mount support located directly above the rear axle. applications: 1964-1967 oldsmobile cutlass 1964-1967 chevy chevelle / malibu 1964-1967 buick skylark 1964-1967 pontiac lemans / gto / tempest

New heavy gauge reproduction trunk floor body mount support above the rear axle. Fits 2 door, 4 door and convertible models. Does not fit wagons 46 3/4 inches wide applications: 1968-1969 oldsmobile cutlass 1968-1969 chevy chevelle/malibu 1968-1969 buick...

New heavy gauge reproduction trunk floor body mount support above the rear axle. Fits 2 door, 4 door and convertible models. Does not fit wagons applications: 1970 oldsmobile cutlass 1970 chevy chevelle/malibu 1970 buick skylark 1970 pontiac...

new heavy gauge reproduction trunk floor body mount support above the rear axle applications: 1971-1972 oldsmobile cutlass 1971-1972 chevy chevelle/malibu 1971-1972 buick skylark 1971-1972 pontiac lemans/gto/tempest 1971-1972 monte carlo

new detailed reproduction cross member located at the back of the car between the frame. applications: 1964-1967 chevelle & malibu 1964-1967 gto / lemans / tempest 1964-1967 skylark 1964-1967 cutlass

This authentically reproduced brace features all of the factory drainage holes as well as the correct flanges for a straightforward installation. Stamped from heavy-gauge steel, the brace fits at the rearmost section of the body, below the trunk pan and...

This authentically reproduced brace features all of the factory drainage holes as well as the correct flanges for a straightforward installation. Stamped from heavy-gauge steel, the brace fits at the rearmost section of the body, below the trunk pan and...

new detailed reproduction rear cross member located at the back of the car between frame. applications: 1968-1972 chevelle & malibu 1968-1972 gto / lemans / tempest 1968-1972 skylark 1968-1972 cutlass 1970-1972 monte carlo

Welded to the underside of the trunk floor behind the rear bumper, the last two body mounts to attach here. Does not fit El Camino or other wagon models, this is for 2 door and 4 door models. applications: 1968-1969 Chevy Chevelle & Malibu

Welded to the underside of the trunk floor behind the rear bumper, the last two body mounts to attach here. For all models except wagon applications: 1970 Chevelle & Malibu

Welded to the underside of the trunk floor behind the rear bumper, the last two body mounts to attach here. For all models except wagon applications: 1971-1972 Chevelle & Malibu

New reproduction gas tank straps, fits 2 door and 4 door models, not for wagons. applications:1964-1967 Chevelle & Malibu 1964-1967 GTO / Lemans / Tempest 1964-1967 Cutlass 1965-1966 Chevy Impala/Bel Air 1964-1967 Skylark & Special

Sold as a pair fits all models except wagon and El camino. applications: 1968-1972 chevelle / malibu1968-1972 gto / lemans / tempest1968-1972 cutlass / 4421968-1972 skylark1970-1972 monte carlo

Fits 2 door and 4 door models except wagons. applications: 1973-1977 Chevelle / Malibu / Laguna 1973-1977 GTO / Lemans / Tempest 1973-1977 Cutlass 1973-1977 Monte Carlo

Pre-molded to fit like the originals, sold as a 2 piece set. applications: 1978-1988 Monte Carlo 1978-1983 Malibu 1978-1981 Lemans

includes lock ring & gasket. 3/8 in. with 3 outlets.fits: 1978-88 cutlassfits: 1978-87 lemans-grand am-grand prixfits: 1978-83 malibufits: 1978-88 monte carlofits: 1978-88 regal & grand national

includes lock ring & gasket. 3/8 in. with 2 outlets. applications: 1978-1988 cutlass 1978-1987 lemans-grand am-grand prix 1978-1983 malibu 1978-1988 monte carlo 1978-1988 regal & grand national

This is a set of trunk floor pan to frame rail brace repair plates. this kit is to be used to repair the rusted areas where the trunk floor attaches to the frame rails behind the rear wheels. complete with bolts. 2 door coupe only...

New correct reproduction of the original tail panel section and weatherstrip channel. Fits all models except wagons. applications: 1964-1965 Chevelle & malibu

new full replacement tail light panel assembly for a full rear end restoration. includes tail light extensions & reinforcements attached.fits: 1965 chevelle & malibu*except wagon

New correct reproduction tail pocket with weatherstrip gutter channel. includes tail light bucket reinforcements attached. Fits non-wagon models. Rh= passenger side applications: 1965 Chevelle & Malibu  

New correct reproduction tail pocket with weatherstrip gutter channel. includes tail light bucket reinforcements attached. Fits non-wagon models. Lh= driver side applications: 1965 Chevelle & Malibu

complete oe style. includes all contours, shapes and bends of original including weatherstrip trough.  predrilled to accept all mouldings. include our 3-piece set of inner braces (920-3466-s) for easy and complete installation. applications: 1966...

complete oe style. includes all contours, shapes and bends of original including weatherstrip trough. predrilled to accept all mouldings. applications: 1967 chevelle & malibu

This new rear body panel is the section between the outer tail lamp housings, it includes the left and right inner braces and the trunk lock support panel with the catch. applications: 1968-1969 Chevelle & Malibu

complete oe style. includes all contours, shapes and bends of original including weatherstrip trough. predrilled to accept all mouldings. include our 2-piece set of inner braces (920-3468-s) and trunk lock support/center brace (810-3468) for easy and...

complete oe style. includes all contours, shapes and bends of original including weatherstrip trough. predrilled to accept all mouldings. include our 2-piece set of inner braces (920-3468-s) and trunk lock support/center brace (810-3468) for easy and...

complete oe style. includes all contours, shapes and bends of original including weatherstrip trough.    Tail light Panel 1970 1971 1972 Chevy Chevelleapplications: 1970-1972 chevelle & malibu

These tail light reinforcements are included in our assembly and tail light pockets. Fits non-wagon models. Rh= passenger side applications: 1965 Chevelle & Malibu  

These tail light reinforcements are included in our assembly and tail light pockets. Fits non-wagon models. Lh= driver side applications: 1965 Chevelle & Malibu  

new detailed heavy gauge reproduction 2 pc set.fits: 1966 chevelle & malibu

fits: 1968-69 chevy chevelle / malibu

often bent and rusted, our valance panels are complete oe style and are direct replacements of orginals. made to original thickness from durable steel and edp coated for corrosion resistance applications: 1970 chevelle & malibu

often bent and rusted, our valance panels are complete oe style and are direct replacements of orginals. made to original thickness from durable steel and edp coated for corrosion resistance applications: 1971-1972 chevelle & malibu

New heavy gauge reproduction kit (5 piece set) for all models except wagon. applications: 1964-1965 Chevelle & Malibu

New heavy gauge reproduction kit (4 piece set) for all models except wagons. applications: 1966-1967 Chevelle & Malibu

New heavy gauge reproduction kit (5 piece set) for all models except wagons. applications: 1968 Chevelle & Malibu

New reproduction 4 piece rear bumper bracket set for all models exept wagons. applications; 1970 Chevelle & Malibu

New reproduction 4 piece rear bumper bracket set for all models except wagons. applications: 1971-1972 Chevelle & Malibu

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as all parts are designed to be a...

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as all parts are designed to be a...

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as all parts are designed to be a...

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as all parts are designed to be a...

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as all parts are designed to be a...

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as all parts are designed to be a...

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as all parts are designed to be a...

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as all parts are designed to be a...

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. bumpers are precision designed and stamped creating a product that looks great and fits even better!. all parts feature, depending on application,...

steel floor and trunk plug, use as needed. applications:1967-73 Camaro & Firebird1964-72 GM A-body1961-70 Impala / Bel-air / Biscayne / Caprice1962-79 Nova & X-body

New reproduction of the original Chevelle emblems popular on almost any car or truck with a cowl hood. Installation is peel and stick, quick and easy!

this weatherstrip fits in the vent assembly. the kit fits both driver and passenger doors of the a body 2 door hardtop and convertibles. our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle...

this weatherstrip fits in the vent assembly. the kit fits both driver and passenger doors of the a body 2 door hardtop and convertibles. our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle...

kit consists of: left & right door seals, roofrail seals, beltlines & a trunk seal. 13 piece kit. our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle. applications: 1970-1972 chevelle 2...

protect your vehicle’s interior from the outside elements and reduce noise level while driving simply by replacing your dried-out or cracked weatherstrip with a proven product that’s accepted in the industry. these beltlines are made from the...

protect your vehicle’s interior from the outside elements and reduce noise level while driving simply by replacing your dried-out or cracked weatherstrip with a proven product that’s accepted in the industry. these beltlines are made from the...

these beltline moldings mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass.  fits the coupe models only. our product is made from the original specs and from high quality ozone resistant...

front and rear bumper guard inserts attach to the deluxe style steel verticle bumper guard with mounting hardware. quality molded rubber with steel core for an exact fit for your vehicle. sold as a 4 piece kit. applications: 1970-1972 chevelle &...

front and rear bumper guard inserts attach to the deluxe style steel verticle bumper guard with mounting hardware. quality molded rubber with steel core for an exact fit for your vehicle. sold as a 4 piece kit. applications: 1969 chevelle & malibu

front and rear bumper guard inserts attach to the deluxe style steel verticle bumper guard with mounting hardware. quality molded rubber with steel core for an exact fit for your vehicle. sold as a 4 piece kit. applications: 1968 chevelle & malibu

front and rear bumper guard inserts attach to the deluxe style steel vertical bumper guard with mounting hardware. quality molded rubber with steel core for an exact fit for your vehicle. sold as a 4 piece kit.