1962 Chevy Impala California Style Front And Rear Bumper Set 1 Piece Design

New Kit for the front and rear. restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as...

1962 Chevy Impala Front Bumper (3 Piece Set)

restoration bumpers are made from heavy gauge steel and feature an oe quality chrome finish. all parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. installation is fast and easy as all parts are designed to be a...

1962 Chevy Impala Steel Front Bumper Filler

Often bent, rusted or missing, this piece fits in the space between the front bumper and grille. Our panels are reproduced to original specifications and EDP coated. Applications: 1962 chevy impala  

Rh - 1962 Chevy Impala Steel Front Fender

New reproduction applications: 1962 chevy impala

Lh - 1962 Chevy Impala Steel Front Fender

New reproduction applications: 1962 chevy impala

Rh - 1962 Chevy Impala Front Inner Fender And Hood Hinge Support

Reproduction of the original hood hinge support designed for use on 1962 Impala and Full size models. Attaches to the top of the inner fender skirt. The lower portion of the hood hinge then bolts to this support. Each support is manufactured in heavy...

Lh - 1962 Chevy Impala Front Inner Fender And Hood Hinge Support

Reproduction of the original hood hinge support designed for use on 1962 Impala and Full size models. Attaches to the top of the inner fender skirt. The lower portion of the hood hinge then bolts to this support. Each support is manufactured in heavy...

Rh -1962 Impala & Fullsize Chevy Steel Front Inner Fender

applications: 1962 Impala 1962 Bel Air 1962 Biscayne

Lh -1962 Impala & Fullsize Chevy Steel Front Inner Fender

applications: 1962 Impala 1962 Bel Air 1962 Biscayne

Universal Fit Steel Hood Scoop (4 Inch Rise)

Generic U-fit steel hood scoop with a 4" raise. This scoop is can be modified to fit any application. Installation will require cutting the scoop to the desired length and forming the scoop to the curvature of your vehicle's hood. We recommend welding...

Universal Fit Steel Hood Scoop (2 Inch Rise)

Generic U-fit steel hood scoop with a 2" raise. This scoop is can be modified to fit any application. Installation will require cutting the scoop to the desired length and forming the scoop to the curvature of your vehicle's hood. We recommend welding...

1962 Impala & Full Size Chevy Steel OE Hood

applications: 1962 impala & full size chevy When your looking for a replacement steel hood look no further than Body Shop Price, we offer a wide range of OE style hoods, steel cowl hoods and other custom upgrades that will make your car or truck a...

1962 Impala & Fullsize Chevy Hood Release Assembly

New correct edp coated reproduction hood latch assembly. applications: 1962 Impala 1962 Bel Air 1962 Biscayne

1962 Impala Hood Latch Support

New reproduction hood latch center vertical support. applications: 1962 impala

1962-1963 Impala & Full Size Chevy Battery Tray With Bracket

reproduction battery tray applications: 1962-1963 chevy impala 1962-1963 chevy biscayne 1962-1963 chevy bel-air

1962 Impala & Full Size Chevy Steel Radiator Support

new reproduction & edp coated applications: 1962 impala / bel air / biscayne

1962 Impala & Full Size Chevy Upper Radiator Support

reproduction, edp coated applications: 1962 chevy impala 1962 full size chevy

1961-1964 Impala & Fullsize Chevy Upper Cowl Panel

Reproduction upper cowl panel for 1961-1964 Chevy fullsize models. Manufactured to factory specifications featuring pre-made openings where necessary and coated in a rust preventive coatings. applications: 1961-1964 Impala & Fullsize Chevy

1962 Impala Outer Cowl Vent Grille

reproduction outer cowl panel for 1961-1964 chevy fullsize models. manufactured to factory specifications featuring pre-made openings where necessary and coated in a rust preventive coatings. applications: 1962 impala 1962 Bel Air 1962 Biscayne

1961-1964 Impala & Fullsize Chevy Front Floor To Firewall Braces

lh & rh (pair) these braces are located directly below the driver & passenger side front floor pan and run parallel with the frame. applications: 1961-1964 Impala 1961-1964 Bel Air 1961-1964 Biscayne

Lh - 1962-1964 Chevy Impala & Full Size Chevy Outer Cowl Panel

New outer cowl side panel, commonly rusted at the lower section this panel is made just as original. applications: 1962-1964 Impala 1962-1964 Bel Air 1962-1964 Biscayne

Rh - 1962-1964 Chevy Impala & Full Size Chevy Outer Cowl Panel

New outer cowl side panel, commonly rusted at the lower section this panel is made just as original. applications: 1962-1964 Impala 1962-1964 Bel Air 1962-1964 Biscayne  

1961-1964 Impala & Full Size Chevy Complete Cab Floor

Reproduction full OE style floor pan assembly with braces and inner rocker panels for the 1961-64 Chevrolet Bel Air, Biscayne and Impala. Stamped from high quality heavy gauge steel, each floor features the correct shape, size, bends, ribs and holes,...

1961-1964 Impala & Full Size Chevy Complete Front Floor Panel

62.5 in. wide x 65.25 in. long front passenger area floor without braces. begins at the factory seam of the firewall to the front edge of the rear seat. applications: 1961-1964 impala & full size chevy Floor pans take a beating from the elements, and...

Rh - 1961-1964 Impala & Full Size Chevy Cab Floor Half

Die stamped cab floor section, meets the firewall seam and center of the transmission tunnel. For 2 door and 4 door models. applications: 1961-64 impala & full size chevy Floor pans take a beating from the elements, and tend to trap moisture coming...

Lh - 1961-1964 Impala & Full Size Chevy Cab Floor Half

Die stamped cab floor section, meets the firewall seam and center of the transmission tunnel. For 2 door and 4 door models. applications: 1961-64 impala & full size chevy Floor pans take a beating from the elements, and tend to trap moisture coming...

Rh - 1961-1964 Impala & Full Size Chevy Rear Of Front Seat Cab Floor Brace

Die formed & heavy gauge like original. 25 in. long applications: 1961-1964 Impala & Fullsize Chevy

Lh - 1961-1964 Impala & Full Size Chevy Rear Of Front Seat Cab Floor Brace

Die formed & heavy gauge like original. 25 in. long applications: 1961-1964 Impala & Fullsize Chevy

Rh - 1961-1964 Impala & Full Size Chevy Under Rear Floor Pan Brace

Die formed & heavy gauge like original. 18 in. long applications: 1961-1964 Impala & Full size Chevy

Lh - 1961-1964 Impala & Full Size Chevy Under Rear Floor Pan Brace

Die formed & heavy gauge like original. 18 in. long applications: 1961-1964 Impala & Full size Chevy

1961-1964 Impala & Full Size Chevy Complete Under Rear Seat Floor Panel

complete replacement floor panel located under the rear seat, extended the entire width of the cab floor. applications: 1961-1964 Impala 1961-1964 Bel Air 1961-1964 Biscayne Floor pans take a beating from the elements, and tend to trap moisture coming up...