Trail Duster

die stamped steel patch for the lower rear section of the front fenders on the driver and passenger side, where it commonly rusts out. 15 in. high Note: Trim the body line off the top for 81-93 models applications: 1972-1993 dodge pickup 1972-1993...

die stamped steel patch for the lower rear section of the front fender where it commonly rusts out. 15 in. high Note: Trim the body line off the top for 81-93 models applications: 1972-1993 dodge pickup 1972-1993 ramcharger & trail duster

die stamped steel patch for the lower rear section of the front fender where it commonly rusts out. 15 in. high Note: Trim the body line off the top for 81-93 models applications: 1972-1993 dodge pickup 1972-1993 ramcharger & trail duster

Generic U-fit steel hood scoop with a 4" raise. This scoop is can be modified to fit any application. Installation will require cutting the scoop to the desired length and forming the scoop to the curvature of your vehicle's hood. We recommend welding...

Generic U-fit steel hood scoop with a 2" raise. This scoop is can be modified to fit any application. Installation will require cutting the scoop to the desired length and forming the scoop to the curvature of your vehicle's hood. We recommend welding...

Includes Nut With Correct Thread For OE Body Mount Bolt Note: these parts arrive bare steel not primed or painted New reproduction steel rear cab mount, located under the rear outer floor section on the driver or passenger side. kit includes (2)...

Unlike others ares Includes Nuts With Correct Thread For OE Body Mount Bolt Arrive bare steel, NOT primed or painted new reproduction steel front and rear cab mounts, located under the outer floor section and rear floor section on the driver and...

Unlike others ares Includes Nuts With Correct Thread For OE Body Mount Bolt Arrives bare steel, NOT primed or painted new reproduction steel front cab mount, located under the outer floor section on the passenger side.  kit includes (1) "nut-plate"...

Unlike others ares Includes Nuts With Correct Thread For OE Body Mount Bolt Arrives bare steel, NOT primed or painted new reproduction steel front cab mounts, located under the front floor section on the driver and passenger sides. kit includes (2)...

Unlike others ares Includes Nuts With Correct Thread For OE Body Mount Bolt Arrives bare steel, NOT primed or painted new reproduction steel front cab mount, located under the outer floor section on the driver side. this 16 gauge replacement front cab...

Includes Nut With Correct Thread For OE Body Mount Bolt new reproduction steel rear cab mount, located under the rear outer floor section on the driver or passenger side. kit includes (1) "nut-plate" that will accept the factory threaded bolt, this will...

This die stamped floor pan is exact for 1972-1980 2wd models, requires modification at the tunnel side for 4wd trucks & manual transmission. This floor panel can be and is being used on 1981-1993 but also requires modification at the tunnel side for...

1972-1993 Dodge D/W series driver side front floor patch panel and front cab mount support. This die stamped floor pan is exact for 1972-1980 2wd models, requires modification at the tunnel side for 4wd trucks & manual transmission. This floor panel...

1972-1993 Dodge D/W series driver side front floor patch panel and front cab mount support. This die stamped floor pan is exact for 1972-1980 2wd models, requires modification at the tunnel side for 4wd trucks & manual transmission. This floor panel...

This die stamped floor pan is exact for 1972-1980 2wd models, requires modification at the tunnel side for 4wd trucks & manual transmission. This floor panel can be and is being used on 1981-1993 but also requires modification at the tunnel side for...

This die stamped floor pan is exact for 1972-1980 2wd models, requires modification at the tunnel side for 4wd trucks & manual transmission. This floor panel can be and is being used on 1981-1993 but also requires modification at the tunnel side for...

This die stamped floor pan is exact for 1972-1980 2wd models, requires modification at the tunnel side for 4wd trucks & manual transmission. This floor panel can be and is being used on 1981-1993 but also requires modification at the tunnel side for...

This is a die stamped slip on style rocker panel  it does not include rear corner. 42 in. long Gauge Of Metal: 18 Ga. applications: 1972-1993 Dodge Ram Pickup D/W Series 1972-1993 ramcharger & trailduster Rocker panels take a beating from the...

This is a die stamped slip on style rocker panel  it does not include rear corner. 42 in. long Gauge Of Metal: 18 Ga. applications: 1972-1993 Dodge Ram Pickup D/W Series 1972-1993 ramcharger & trailduster Rocker panels take a beating from the...

This 4 piece kit includes the outer rocker panels and the patch panels located between the rear tire and door, when both parts are installed together they will cover the entire area from the back edge of the front fender to the rear tire. Quarter patch...

This 2 piece kit includes the outer rocker panel and the patch panel located between the rear tire and door, when both parts are installed together they will cover the entire area from the back edge of the front fender to the rear tire. Quarter patch...

This 2 piece kit includes the outer rocker panel and the patch panel located between the rear tire and door, when both parts are installed together they will cover the entire area from the back edge of the front fender to the rear tire. Quarter patch...

located between the rear tire and door. 22 in. wide x 16 in. high, Note: Trim 2 inches off the top of this panel for 81-93 models. Lh Rh= driver and passenger side included applications: 1972-1993 Ramcharger & Trailduster The exterior body panel...

This discounted kit includes both lower front sections of the rear quarter and both sections behind the rear wheel on the driver and passenger side. The lower rear sections stops in front of the rear corner does not wrap behind the bumper (see image)...

Nicely die stamped quarter patch located between the rear tire and door, connects to the rocker panel same as original. 22 in. wide x 16 in. high Trim 2 inches off the top of this panel for 81-93 models. Rh= passenger side applications: 1972-1993...

Nicely die stamped quarter patch located between the rear tire and door, connects to the rocker panel same as original. 22 in. wide x 16 in. high Trim 2 inches off the top of this panel for 81-93 models. Lh= driver side applications: 1972-1993...

These rust repair panels are located directly above the rear wheels. 20 in. high x 41 in. wide Lh Rh: driver and passenger side applications: 1972-1980 ramcharger & trailduster 1972-1980 dodge pickup The exterior body panel located directly above...

This rust repair panel is located directly above the rear wheel. 20 in. high x 41 in. wide applications: 1972-1980 ramcharger & trailduster 1972-1980 dodge pickup The exterior body panel located directly above the rear tire is one of the most...

This rust repair panel is located directly above the rear wheel. 20 in. high x 41 in. wide Lh- driver side applications: 1972-1980 ramcharger & trailduster 1972-1980 dodge pickup The exterior body panel located directly above the rear tire is one of...

This panel repairs the rust around the complete rear wheel opening on shortbed, longbed, Ramcharger and Trailduster. This repair panels gives you 11 inches in front of the rear wheel and 11 inches in back of the rear wheel. Requires modification on...

This rust repair panel is located directly above the rear wheel. 16 in. high x 31 in. wide, gives you around 9 inches above the wheel. applications: 1981-1993 dodge ram pickup 1981-1993 ramcharger The exterior body panel located directly above the rear...

These rust repair panels are located directly above the rear wheels for the driver and passenger sides.. 16 in. high x 31 in. wide, gives you around 9 inches above the wheel. applications: 1981-1993 dodge ram pickup 1981-1993 ramcharger The exterior...

This rust repair panel is located directly above the rear wheel. 16 in. high x 31 in. wide, gives you around 9 inches above the wheel. applications: 1981-1993 dodge ram pickup 1981-1993 ramcharger The exterior body panel located directly above the rear...

This panel repairs the rust around the complete rear wheel opening on shortbed, longbed, Ramcharger and Trailduster. This repair panels gives you 11 inches in front of the rear wheel and 11 inches in back of the rear wheel. Requires modification on...

This panel repairs the rust around the complete rear wheel opening on shortbed, longbed, Ramcharger and Trailduster. This repair panels gives you 11 inches in front of the rear wheel and 11 inches in back of the rear wheel. Requires modification on...

located behind the rear tire, stops in front of the rear corner does not wrap behind the bumper (see image) 22 in. long x 16 in. high. Rh= passenger side applications: 1972-1980 Ramcharger & Trailduster The exterior body panel located directly behind...

Located behind the rear tire, stops in front of the rear corner does not wrap behind the bumper (see iamage) 22 in. long x 16 in. high. Lh= driver side applications: 1972-1980 Ramcharger & Trailduster The exterior body panel located directly behind...

This seal installs on the tailgate and is made from high-quality, ozone-resistant EPDM rubber. applications: 1974-1977 Dodge Ramcharger 1974-1977 Plymouth Trailduster  

This weatherstrip seal mounts on the liftgate and seals it against the body. Our seal is crafted from high-quality EPDM rubber that resists ozone and other environmental factors. It's manufactured to meet the same specifications as the original, ensuring...

This new rear seal goes first in the opening of the lift gate then the glass is placed in the opening. A separate black lock strip (WLS900 included) inserts into the rubber and secures the glass in place. made from ozone resistant epdm rubber and from...

This chrome lockstrip insert's into the weatherstrip to lock in the glass for the front windshield. Includes center cover clip. It's sold as a single piece to do one application. Made from ozone resistant EPDM rubber and from the same OE specs as the...

this black lockstrip insert's into the weatherstrip to lock in the glass. it's sold as a single piece to do one application (example front windshield). made from ozone resistant material and from the same oe specs as the original for an authentic fit and...

these beltline moldings mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass.  our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle...

these beltline moldings mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass.  our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle...

these beltlines mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass. our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle. applications:...

these beltlines mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass. our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle. applications:...

this windshield seal goes first on the body then the glass is placed in the opening. a separate black lock strip (included) inserts into the rubber and secures the glass in place. made from ozone resistant epdm rubber and from the same oe specs as the...

this 2 piece kit fits both driver and passenger doors of the vent assemblies. our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle. applications: 1978-1986 dodge ram pickup 1978-1986 ramcharger...

this 2 piece kit fits both driver and passenger doors of the vent assemblies. our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle. applications: 1972-1977 dodge ram pickup 1972-1977 ramcharger...

this seal presses on the pinch weld on the body. this is a pair for the left and right side. it's made from high quality ozone resistant epdm rubber. applications: 1978-1993 dodge ram pickup 1978-1993 ramcharger & trail duster

this seal mounts on the body with weatherstrip adhesive glue (not included). this is a pair for the left and right side. it's made from high quality ozone resistant epdm rubber. applications: 1972-1977 dodge ram pickup 1972-1977 ramcharger & trail...

door kit consists of: door seals, beltlines and glass run channels. this kit is for the left and right front doors. our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle. applications: 1980-1993...

door kit consists of: door seals, beltlines and glass run channels. this kit is for the left and right front doors. our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle. applications: 1978-1979...

door kit consists of: door seals, beltlines and glass run channels. this kit is for the left and right front doors. our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle. applications: 1972-1977...