Description
This die stamped floor pan is exact for 1972-1980 2wd models, requires modification at the tunnel side for 4wd trucks & manual transmission. This floor panel can be and is being used on 1981-1993 but also requires modification at the tunnel side for 2WD/4WD trucks & manual transmission, it also needs adjustment at the front edge of the seat because this is once again exact for 1972-1980 2wd trucks. The outer edge has a vertical pinch weld flange along the entire edge to meet the rocker panel and is also vertical on the inside behind the kick panel.
Dimensions: 29 in. long x 29 in. wide
Lh= driver side
applications:
1972-1993 Dodge Ram Pickup D/W Series
1972-1993 ramcharger & trailduster
Floor pans take a beating from the elements, and tend to trap moisture coming up from the ground as well as moisture dripping off of your boots. Weather your repairing a small section or replacing the entire floor the good news is that we have a wide selection of replacement floor panels to help you fix your ride.
All of our replacement floor panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing. The stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape. Since the panels are an exact match, the old panel will need to be cut out so that the new one can be welded in its place.
Each panel has an EDP coating for additional corrosion protection. The e-coating leaves a black finish that can be scuffed and painted over. For best finishing results we recommend scuffing the e-coat, priming, and then top coating with an automotive grade paint.
Whether you need to replace the driver side, the passenger side, front or rear, we have the parts that you’re looking for. Replace your rusted floor pan by ordering from Body Shop Price today.
