These two parts are spot welded from the factory where the top of the windshield sits, it's very common to replace both panels at the same time so the windshield can be installed with the new gasket. applications: 1964-1966 chevy & gmc pickup ...

new edp coated steel panel located on the inside of the roof skin at the front edge, your sun visors attach to this panel. applications: 1947-1953 chevy & gmc pickup

Inner Roof Panel w/ Lamp Hole - 73-87 Chevy GMC C/K Squarebody Pickup Truck Standard Cab. These premium reproduction inner roof skins are a direct replacement to your factory interior inner roof panel. Features the same bends, holes, curves,...

new edp coated inner roof brace located directly above the windshield inside the cab. This panel has a second layer of metal around the visor holes for additional reinforcement. applications: 1955-1959 chevy & gmc pickup 1955-1959 chevy &...

Ships oversize ground applications: 1955-1959 chevy & gmc pickup (2nd series)

New die formed & edp coated reproduction. Factory style inner roof panel only for all 1967-1972 chevy & gmc pickup 2 door standard cab models. Note; this panel does not have the headliner holes pre-drilled. applications: 1967-1972 Chevy &...

New reproduction of the originals, This kit repairs the commonly rusted areas on all Blazer's and Jimmy's. The outer channel is located above the windshield on the outside of the glass between the a-pillar. Coated in weld thru primer...

These panels are located at the front of the windshield and repair this commonly rusted area where the glass and the gasket rest. applications: 1967 1968 1969 1970 And 1972 Chevy & GMC pickup 1967 1968 1969 1970 And 1972 Suburban

This panel is located at the front of the windshield. Edp coated, on the corners you get 6.75 inches towards the rear. applications: 1967 1968 1969 1970 1972 Chevy & GMC pickup 1967 1968 1969 1970 1972 Suburban

new reproduction of the original, located above the windshield on the outside of the glass between the a-pillar, use when upper windshield channel is rusted. applications: 1967-1972 chevy & gmc pickup 1967-1972 suburban 1969-1972 blazer & jimmy...

These panels are located at the front of the windshield and repair this commonly rusted area where the glass and the gasket rest. applications: 1971 Chevy & GMC pickup 1971 Chevy & GMC Suburban

This panel is located at the front of the windshield.edp coated, on the corners you get 6.75 inches towards the rear. Note: Exact match for 1971 with embossed mirror riser applications: 1971 Chevy & GMC pickup 1971 Suburban

New reproduction header panel with weatherstrip retainer for t-top g-body cars is now available. applications: 1978-1988 Buick Regal & Grand National 1978-1988 Monte Carlo 1978-1988 Cutlass 1978-1987 Grand Prix

New edp coated roof brace and dome light braces are spot welded to the roof skin for support. applications: 1956 Ford F100 F250

New edp coated inner roof braces are spot welded to the roof skin for support, some models use 2 bows some use 4 bows this kit is for models with 2 bows. applications: 1966-1977 Bronco

New edp coated inner roof bows are spot welded to the roof skin for support, some models use 2 some use 4 these are sold as each order as needed. applications: 1966-1977 Bronco

This polished stainless steel front door  window vent shade kit includes left and right shades, and all necessary installation hardware. applications: 1951-1955 Chevrolet Pickup Truck (1st series) 1951-1955 GMC Pickup Truck (1st series)

This stainless steel front door window vent shade kit includes left and right shades, and all necessary installation hardware. applications: 1960-1963 Chevrolet Pickup Truck 1960-1963 GMC Pickup Truck

This Polished stainless steel front door window vent shade kit includes left and right shades, and all necessary installation hardware. applications: 1973-1986 Chevy & GMC pickup c/k series 1987-1991 Chevy & GMC pickup r/v series

This Polished stainless steel front door window vent shade kit includes left and right shades, and all necessary installation hardware. applications: 1967-1972 Chevrolet Pickup Truck 1967-1972 GMC Pickup Truck

New heavy gauge reproduction of the correct trunk lid support bracket that the trunk lid attaches to, welding required. applications: 1967-1969 Camaro 1967-1969 Firebird

new reproduction roofrail weatherstrip retainer set, includes corner connectors. applications: 1967 camaro 1967 firebird

new reproduction roofrail weatherstrip retainer set, includes corner connectors. applications: 1968-1969 camaro 1968-1969 firebird

New die formed & edp coated for 2 coupe. Sold for the driver and passenger sided upper sections. applications: 1966-1967 Nova & Chevy II 2 Door Coupe

new proprietary tooling in 2017. accurate reproduction of original. this is the metal the moldings attach to. replace those commonly rusted and dented gutters for that show car look. ensures proper fit for new stainless moldings. gm part #; rh - 4543285,...

Stamped steel pillar supports are manufactured identical to the original equipment. The supports screw to the windshield pillar and accept the drip rail moldings. All mounting holes are correctly located for a straightforward install...

Die formed & edp coated. this set does the roof line only and does not include the a-pillar. Sold as a pair for the driver and passenger side applications: 1968-1969 Chevelle & Malibu 2 door coupe

Die formed & edp coated, this set does the roof line only and does not include the a-pillar. Sold as a pair for the driver and passenger side. applications: 1970-1972 Chevelle & Malibu 2 door coupe 1970-1972 Buick Skylark 2 door Coupe 1970-1972...

New steel edp coated drip rail starts at the base of the windshield to the top of the windshield to meet the upper drip rail. applications: 1967-1969 Camaro coupe 1967-1969 Firebird coupe

new edp coated steel drip rails start at the top of the a-pillar and run back to the base of the quarter window. use when replacing the outer roof skin. applications: 1967-1969 camaro 1967-1969 firebird

Die formed and coated in weld thru primer. Steel drip rails usually rusted or completely missing, use when replacing the roof skin or underlying supports. Includes Driver and Passenger side. applications: 1955-1957 Chevy 2 door and 4 door sedan

Die formed and edp coated steel drip rails usually rusted or completely missing, use when replacing the roof skin or underlying supports. Includes Driver and Passenger side. applications: 1955-1957 Chevy 2 door hardtop

Die formed and coated in weld thru primer. Steel drip rails usually rusted or completely missing, use when replacing the roof skin or underlying supports. RH: Passenger side applications: 1955-1957 Chevy 2 door and 4 door sedan

Die formed and coated in weld thru primer. Steel drip rails usually rusted or completely missing, use when replacing the roof skin or underlying supports. RH: Passenger side applications: 1955-1957 Chevy 2 door and 4 door sedan

Die formed and edp coated steel drip rails usually rusted or completely missing, use when replacing the roof skin or underlying supports. RH: Passenger side. applications: 1955-1957 Chevy 2 door hardtop

Die formed and edp coated steel drip rails usually rusted or completely missing, use when replacing the roof skin or underlying supports. LH: Driver side. applications: 1955-1957 Chevy 2 door hardtop

The metal rail to which the molding attaches, use when replacing roof skin. this is not the trim! For 2 door hardtop models only. Lh Rh= driver and passenger side included applications: 1962-1964 Impala 2 Door Hardtop

new edp coated steel drip rail located on the upper portion of the door opening. applications: 1947-1955 chevy & gmc pickup (1st series)

new edp coated steel drip rail located on the upper portion of the door opening. applications: 1947-1955 chevy & gmc pickup (1st series)

Creates the channel needed for the rubber gasket to attach above the door, use when replacing or repairing the a-pillar or b-pillar assembly. Rh= passenger side applications: 1967-1972 chevy & gmc pickup

Creates the channel needed for the rubber gasket to attach above the door, use when replacing or repairing the a-pillar or b-pillar assembly. Lh= driver side applications: 1967-1972 chevy & gmc pickup

steel edp coated replacement front door drip rail. applications: 1967-1972 chevy & gmc pickup

steel edp coated replacement front door drip rail. Lh= driver side applications: 1967-1972 chevy & gmc pickup

This steel edp coated die formed drip rail repairs the area above the passenger side door on the cab. applications: 1956 Ford F100 F250

This steel edp coated die formed drip rail repairs the area above the driver side door on the cab. applications: 1956 Ford F100 F250

New edp coated steel drip rail set includes the above the windshield and the driver and passenger side doors, 2 clips are included to connect the 3 pieces. applications: 1956 Ford Pickup F100 F250

These drip rail moldings attach to the steel drip edge around the outside edge of the roof. Use when replacing the existing drip rail moldings of when restoring the sheet metal. 4 piece set applications: 1966-1977 Bronco

new complete set of drip rail moldings for all 1967-1969 f-bodies coupes, this 6 piece set includes both a-pillar, uppers and corner connectors. applications: 1967-1969 camaro 1967-1969 firebird

complete 6 piece set for lh & rh side of the car. for 2 door hardtop and 2 door sedan. applications: 1970-1972 chevelle & malibu 1970-1972 skylark & gs

Includes deck lid hinges, torsion bars, deck filler support and rear seat backrest. 56 in. wide x 21.5 in. tall applications: 1966-1967 chevy nova 2 door

Complete like original with weatherstrip channel. applications: 1968-1972 nova & chevy ii

New package tray also known as the rear speaker panel includes inner reinforcement support welded in place. Will not fit 300 series or sedan models applications: 1964-1965 Chevelle & Malibu 2 door hardtop

Fits on the side of the package tray. often rusted in the corners where it meets the panels on the ide of the body. if you replace your package tray you will also need this part. Rh= passenger side applications: 1966-67 chevelle & Malibu 2 Door...

Fits on the side of the package tray. often rusted in the corners where it meets the panels on the ide of the body. if you replace your package tray you will also need this part. Lh= Driver side applications: 1966-67 chevelle & Malibu 2 Door Hardtop

die formed & edp coated. new detailed reproduction package tray and deck filler support. applications: 1966-1967 chevelle & malibu (2 door hardtop)

fits on the side of the package tray on the Driver & Passenger side, often rusted in the corners where it meets the panels on the side of the body. if you replace your package tray you will also need this part. sold as a pair for the driver and...

New speaker tray with deck filler support and upper seat hooks for the rear seat backrest. this panel has the factory weatherstrip lip that the deck filler panel is spot welded to. Not for Convertible applications; 1968-1972 Chevelle Malibu Coupe

Fits on the side of the package tray on the Passenger side often rusted in the corners where it meets the panels on the side of the body. if you replace your package tray you will also need this part. Rh= passenger side applications: Does NOT Fit...

Fits on the side of the package tray on the Driver side often rusted in the corners where it meets the panels on the side of the body. if you replace your package tray you will also need this part. Lh= driver side applications: Does NOT Fit...

New complete package tray with backrest, speaker tray and deck filler support. Exact for 1968-1970 modify for 1971-1972. NOT for convertible or wagon models Arrives EDP coated for extreme protection applications: 1968-1972 Chevelle Malibu

New edp coated reproduction for mounting the rear seat. applications: 1970-1972 Chevelle convertible

Fits on the side of the package tray. Often rusted in the corners where it meets the panels on the side of the body. If you replace your package tray you will also need this part. applications: 1967-1969 Chevy Camaro coupe 1969-1969 Pontiac Firebird coupe

new reproduction package tray also includes the lower deck filler support with the weatherstrip channel for the trunk gasket. applications 1967 camaro coupe 1967 firebird coupe

Fits on the side of the package tray. Often rusted in the corners where it meets the panels on the side of the body. If you replace your package tray you will also need this part. applications: 1970-1973 camaro 1970-1973 firebird

Fits on the side of the package tray. Often rusted in the corners where it meets the panels on the side of the body. If you replace your package tray you will also need this part. applications: 1970-1973 camaro 1970-1973 firebird

applications: 1970-1973 camaro 1970-1973 firebird

new reproduction panel located behind the rear window under the deck filler panel applications: 1970-1975 camaro 1970-1975 firebird

New complete with the backrest,speaker tray and deck filler support. applications; 1971-1972 Monte Carlo

New heavy gauge & edp coated upper speaker tray panel. Includes lower deck filler support, order package tray side extensions separately. 640-3468-P applications: 1971-1972 Monte Carlo

new reproduction same steel gauge as original. located on the inside of the cab above the windshield and stretches from the driver's side to the passenger's side. your sun visor's attache here. applications: 1964-1966 chevy & gmc pickup 1964-1966...

Roof front filler brace for 1955-1959 GM trucks. This brace fits under the front portion of the roof panel for added support. Comes EDP coated for rust prevention. applications: 1955-1959 chevy & gmc pickup (2nd series)

New package tray also known as the rear speaker panel includes inner reinforcement support welded in place. The inner reinforcement is the panel found underneath the outer deck filler panel and provides the much needed weatherstrip channel...

New reproduction supports sold as a pair. applications: 1966-1967 Chevy II Nova

New die stamped edp coated rear backrest seat braces, sold as a 2 piece set for 2 door hardtop models only. applications: 1967-1969 Camaro 1967-1969 Firebird

New speaker grille housing for all 55-59 GM trucks, comes chrome plated. applications: 1955-1959 Chevy & GMC Pickup

Reproduction Black textured replacement sun visors for the 47-59 GM Trucks. These slide on to the bracket (sold separately) and are one of the easiest parts to install. Great inexpensive way to spruce up the interior of your truck. 18 inches long...

Reproduction Black replacement sun visors for the 47-59 GM Trucks. These slide on to the bracket (sold separately) and are one of the easiest parts to install. Great inexpensive way to spruce up the interior of your truck. 18 inches long. Brackets sold...

Reproduction OE Chrome Style Sun Visor Bracket for the 47-53 Chevy and GMC model trucks. Made like original, each bracket features the correct shape, size and mounting holes with screws. Rh= passenger side applications: 1947-1953 Chevy & GMC...

Reproduction OE Chrome Style Sun Visor Bracket for the 47-53 Chevy and GMC model trucks. Made like original, each bracket features the correct shape, size and mounting holes with screws. Lh= driver side applications: 1947-1953 Chevy & GMC Pickup Sun...

Reproduction OE Sun Visor Bracket for the 55-59 Chevy and GMC model trucks. Made like original, each bracket features the correct shape, size and mounting holes with screws. Rh= passenger side applications: 1955-1959 Chevy & GMC Pickup 2nd Series Sun...

Reproduction OE Sun Visor Bracket for the 55-59 Chevy and GMC model trucks. Made like original, each bracket features the correct shape, size and mounting holes with screws. Lh= driver side applications: 1955-1959 Chevy & GMC Pickup 2nd Series Sun...

Customize the interior of your 1967-1972 Chevy GMC C/K Pickup Truck or Suburban with our Chrome Sunvisor Bracket. Sold individually for both the left and right sides, these brackets offer a versatile and functional addition to your classic vehicle's sun...

Customize the interior of your 1967-1972 Chevy GMC C/K Pickup Truck or Suburban with our Paintable Sunvisor Bracket. Sold individually for both the left and right sides, these brackets offer a versatile and functional addition to your classic vehicle's...

Upgrade your classic interior with this Black Sun Visors - LH/RH Pair and Black Sun Visor Rods, designed for 1973–1987 Chevrolet and GMC C/K Series Pickup Trucks, including C10, C20, C30, K10, K20, K30, as well as K5 Blazer, GMC Jimmy, and Suburban...

Upgrade your classic interior with this Black Sun Visors - LH/RH Pair and Chrome Sun Visor Rods, designed for 1973–1987 Chevrolet and GMC C/K Series Pickup Trucks, including C10, C20, C30, K10, K20, K30, as well as K5 Blazer, GMC Jimmy, and...

Upgrade your classic interior with this Black Sun Visors - LH/RH Pair, designed for 1973–1987 Chevrolet and GMC C/K Series Pickup Trucks, including C10, C20, C30, K10, K20, K30, as well as K5 Blazer, GMC Jimmy, and Suburban models. These OE-style...

Driver and Passenger Side included Experience the perfect blend of style and functionality with our Sun Visor Bracket in Black, specifically designed for 73-87 Chevy GMC Pickup Trucks, Blazers, Jimmys, and Suburbans, including the C10, C20, C30, K10,...

Driver and Passenger Side included Experience the perfect blend of style and functionality with our Sun Visor Bracket in Chrome, specifically designed for 73-87 Chevy GMC Pickup Trucks, Blazers, Jimmys, and Suburbans, including the C10, C20, C30, K10,...

Customize the interior of your 1969-1972 Blazer and 1970-1972 Jimmy with our Paintable Sunvisor Bracket. Sold as a set for both the left and right sides, these brackets offer a versatile and functional addition to your classic vehicle's sun visor...

Reproduction OE Style Black Sun Visors and Brackets for the Ford F1 and F2 model trucks. Made like original, each bracket features the correct shape, size and mounting holes. Primer bracket is designed to be painted to match. applications: 1948-1952 Ford...

fills the gap between the deck lid and rear window. Will not fit sedan models. applications: 1966-1967 chevy ii & nova 2 door hardtop

Edp coated panel that fills the gap between the rear window and trunk lid. this panel does not have the gutter for the weatherstrip. applications: 1968-1974 Nova 2 door models

Includes inner reinforcement support welded in place. Will not fit 300 series or sedan models applications: 1964-1965 Chevelle & Malibu

This deck filler panel fills the gap between the trunk lid and rear window. Made on new tooling this panel is the best gauge, quality and fitment on the market. Includes the trim clip studs already in place as original and as shown in our images...

This deck filler panel fills the gap between the trunk lid and rear window. For 2 door hardtop & 2 door sedan. applications: 1968-1972 Chevelle / Malibu 1970-1972 Monte Carlo 1969-1970 Pontiac Grand Prix

new edp coated deck filler panel is located directly in front of the trunk lid. applications: 1970-1972 chevelle & malibu convertible

Die formed panels located in the corners below the back glass, these pieces are installed with screws. applications: 2 Door Hardtop 1967 - 1969 Chevrolet Camaro 1967 - 1969 Pontiac Firebird 1969 Pontiac Trans Am

Die formed panel located between the rear window and trunk lid on hardtop models. Includes inner portion below rear window and the inside corners that are attached with one screw each. Studs also attaced for rear window molding clips like original...

die formed panel located between the rear window and trunk lid on hardtop models. includes inner portion below rear window and studs for rear window molding clips like original. applications: 1967-1969 camaro 1967-1969 firebird

New reproduction located in front of the trunk lid and between the rear quarters on convertible models only. applications: 1967-1969 Camaro convertible 1967-1969 Firebird convertible