New edp coated trunk lid assembly ready to sand prime and paint, bolt on installation. Fits all 2 door models except convertible . applications: 1968 Cutlass 2 door

new edp coated trunk lid assembly ready sand prime and paint, bolt on installation. applications: 1968 cutlass convertible

new edp coated trunk lid assembly ready sand prime and paint, bolt on installation. applications: 1969 cutlass convertible

new edp coated trunk lid assembly ready sand prime and paint, bolt on installation. applications: 1969 cutlass all models except convertible

new edp coated trunk lid assembly ready sand prime and paint, bolt on installation. fits all 4 door and convertible body styles. applications: 1970-1972 cutlass

new edp coated trunk lid assembly ready sand prime and paint, bolt on installation. applications: 1970-1972 cutlass  442 / fastback / cutlass S

new edp coated ready to paint and bolt on trunk lid for all 2 door cutlass supreme models except convertible. applications: 1970-1972 cutlass

new replacement catch sometimes missing or just beat on, this trunk lid catch is already bolted to our trunk lids when purchased. fits: 1967-1969 camaro fits: 1967-1969 firebird

crafted with precision tooling from thermoset fiberglass & resin (smc) melted, compressed and formed to original dimensional thickness and specifications just as factory original. includes accurately positioned stud bolts (four with "dog point" ends)...

New reproduction trunk lid hinges made to original specifications of the original. Sold as a pair for the driver and passenger sides. applications: 1970-1981 camaro 1970-1981 firebird & trans am

New reproduction trunk lid hinge made to original specifications of the original. applications: 1970-1981 camaro 1970-1981 firebird & trans am

New reproduction trunk lid hinge made to original specifications of the original. applications: 1970-1981 camaro 1970-1981 firebird & trans am

New edp coated reproduction trunk lid hinge lower supports attach to the bottom of the hinge assembly and to the inner rear wheelhouse. sold as a set only. applications: 1970-1974 Challenger coupe

New reproduction trunk lid hinges, sold as a set only. applications: 1970-1974 challenger coupe

new exact reproduction of the original. sold as a pair lh & rh.fits: 1966-67 nova / chevy ii* 2 door models only

New reproduction trunk lid hinges are sold as a pair for the driver and passenger side. These do not include the torsion rod or the lower brace that welds to the inner wheelhouse applications: 1968-1972 Chevelle & Malibu fits all models except...

New edp coated trunk lid hinges for the driver and passenger side on all convertible models. applications: 1970-1972 Chevelle & Malibu

New edp coated reproduction trunk lid hinges, also includes the mounting brackets which attach to the bottom edge of the hinge and inner wheelhouse. Sold as a complete set for both sides. applications: 2 door coupe and convertible 1967-1969 Camaro...

New heavy gauge reproduction like original fits all 2 door models except convertible. Sold as a pair for the driver and passenger side. applications: 1962-1964 Impala 1962-1964 Bel Air 1962-1964 Biscayne

New correct as original rear liftgate support set, sold as a 2 piece set only. applications: 1969-1972 Chevy Blazer 1970-1972 GMC Jimmy

Type a description for this product here...

New reproduction 3 piece set includes hardware and attaching clips. applications: 1970 challenger

New reproduction 3 piece set includes hardware and attaching clips. applications: 1971-1974 challenger

this trunk lid catch is used on all gm models to latch the trunk lid and make the adjustment in the catch. bolts to the striker support.fits: 1964-70 chevelle & malibufits: 1964-70 gto / lemans / tempestfits: 1964-70 cutlassfits: 1964-70 skylark...

fits on underside of rear (over-the axle) floor pan and is also a crossmember/brace. shape and fit like oe. shock absorbers mount into this bracket. applications: 1966-1970 charger 1966-1970 coronet 1966-1970 roadrunner / satellite / gtx / belvedere

fits on underside of rear (over-the axle) floor pan and is also a crossmember/brace. shape and fit like oe. shock absorbers mount into this bracket. applications: 1970-1974 challenger 1970-1974 barracuda

used to connect the cab floor to the trunk floor.fits: 1962-1967 chevy ii & nova

New heavy gauge reproduction trunk floor body mount support located directly above the rear axle. applications: 1964-1967 oldsmobile cutlass 1964-1967 chevy chevelle / malibu 1964-1967 buick skylark 1964-1967 pontiac lemans / gto / tempest

New heavy gauge reproduction trunk floor body mount support above the rear axle. Fits 2 door, 4 door and convertible models. Does not fit wagons 46 3/4 inches wide applications: 1968-1969 oldsmobile cutlass 1968-1969 chevy chevelle/malibu 1968-1969 buick...

New heavy gauge reproduction trunk floor body mount support above the rear axle. Fits 2 door, 4 door and convertible models. Does not fit wagons applications: 1970 oldsmobile cutlass 1970 chevy chevelle/malibu 1970 buick skylark 1970 pontiac...

new heavy gauge reproduction trunk floor body mount support above the rear axle applications: 1971-1972 oldsmobile cutlass 1971-1972 chevy chevelle/malibu 1971-1972 buick skylark 1971-1972 pontiac lemans/gto/tempest 1971-1972 monte carlo

New reproduction brace located under the trunk floor where the top of the shock attaches. Often rusted or missing from a previous bad patch job, this will get your shock aligned and give it the proper reinforcement it needs. Lh= driver...

new 16 gauge steel reproductions of the originals. the left and right trunk floor body mount pockets used on all convertibles, can be used to convert non-convertible trunk floor to convertible. applications: 1955-1957 chevy convertible

new edp coated reproduction of the original. welds to underside of floor between main floor & trunk floor. used on all body styles including station wagon & nomad applications: 1955-1957 chevy bel air

new reproduction cargo floor lower shock support panel. Lh: driver side applications: 1955-1957 Chevy Nomad1955-57 Chevy Wagon1955-57 Chevy Sedan Delivery  

new reproduction cargo floor lower shock support panel. Rh: passenger side applications: 1955-1957 Chevy Nomad1955-57 Chevy Wagon1955-57 Chevy Sedan Delivery

New reproduction of original. welds to underside of floor at trunk floor seam, includes rubber snubber. used on all body styles to prevent rear end from striking floor. applications: 1955-1957 Chevy all models

These upper rear shock mounts are easily replaced by removing the original rivets and attaching this new heavy steel gauge replacement. Includes all mounting hardware. With Single Rear Wheel (does not fit dually) Lh Rh= driver and passenger side...

This driver side upper rear shock mount is easily replaced by removing the original rivets and attaching this new heavy steel gauge replacement.includes all mounting hardware. With Single Rear Wheel (does not fit dually) Lh= driver side included 4 wheel...

This passenger side upper rear shock mount is easily replaced by removing the original rivets and attaching this new heavy steel gauge replacement.includes all mounting hardware. With Single Rear Wheel (does not fit dually) Rh= passenger side included 4...

the upper rear shock mounts are welded to a cross member, the force of the shock pushing can strain the mount, simply cut off the original mount, prepare surface and weld in our replacement. Made of 11 Gauge Metal Applications: 1999-2006 Chevy & GMC...

the upper rear shock mounts are welded to a cross member, the force of the shock pushing can strain the mount, simply cut off the original mount, prepare surface and weld in our replacement. Made of 11 Gauge Metal. Applications: 1999-2006 chevy & gmc...

applications: 1987-1995 Jeep Wrangler YJ

Heavy duty, weld-in, high quality replacement for the frame cross member that supports the fuel tank. applications: 1997-2006 Wrangler TJ

Edp coated heavy steel gauge. This shock mount bracket is located below the rear trailing arm and the rear shock absorber attach here. 6.75 in. wide x 4 in. high applications: 1967-1972 Chevy & GMC pickup 2WD 1967-1972 Suburban 2WD 1969-1972 Blazer...

Edp coated heavy steel gauge. This shock mount bracket is located below the rear trailing arm and the rear shock absorber attach here. 6.75 in. wide x 4 in. high applications: 1967-1972 Chevy & GMC pickup 2WD 1967-1972 Suburban 2WD 1969-1972 Blazer...

often rusted and bent, this bracket allows the rear of the rear leaf spring to be attached.  welds to frame rail (895-1067-r), trunk floor (800-1370) and rear crossmember (870-1067).  it's wise to replace this important part if you're making...

often rusted and bent, this bracket allows the rear of the rear leaf spring to be attached.  welds to frame rail (895-1067-l), trunk floor (800-1370) and rear crossmember (870-1067).  it's wise to replace this important part if you're making...

often rusted and bent, this multi-piece, prewelded bracket allows the front of the rear leaf spring to be attached.  welds to the frame rail, underseat pan and inner rocker panel.  it's wise to replace this important part if you're making...

often rusted and bent, this multi-piece, prewelded bracket allows the front of the rear leaf spring to be attached.  welds to the frame rail, underseat pan and inner rocker panel.  it's wise to replace this important part if you're making...

this 4 piece kit will provide you with all the brackets, front and rear, required to mount the rear leaf springs. applications: 1966-1970 roadrunner / satellite / gtx / belvedere

often rusted and bent, this multi-piece, prewelded bracket allows the front of the rear leaf spring to be attached.  welds to frame rail (895-2468-r), underseat pan (420-1468) and inner rocker panel (440-1466-r).  it's wise to replace this...

often rusted and bent, this multi-piece, prewelded bracket allows the front of the rear leaf spring to be attached.  welds to frame rail (895-2468-r), underseat pan (420-1468) and inner rocker panel (440-1466-l).  it's wise to replace this...

often rusted and bent, this multi-piece, prewelded bracket allows the rear of the rear leaf spring to be attached.  welds to frame rail (895-2468-l), trunk floor and rear crossmember (870-1468). it's wise to replace this important part if you're...

often rusted and bent, this multi-piece, prewelded bracket allows the rear of the rear leaf spring to be attached.  welds to frame rail (895-2468-l), trunk floor and rear crossmember (870-1468). it's wise to replace this important part if you're...

often rusted and bent, this multi-piece, prewelded bracket allows the front of the rear leaf spring to be attached.  welds to frame rail (895-1570-l), underseat pan (420-1570) and inner rocker panel (440-2570-l chall.) (440-1570-l cuda).  it's...

this 4 piece kit will provide you with all the brackets, front and rear, required to mount the rear leaf springs. applications: 1966-1970 charger 1966-1970 coronet

often rusted and bent, this multi-piece, prewelded bracket allows the rear of the rear leaf spring to be attached.  welds to frame rail (895-2468-r), trunk floor and rear crossmember (870-1468). it's wise to replace this important part if you're...

often rusted and bent, this multi-piece, prewelded bracket allows the rear of the rear leaf spring to be attached.  welds to frame rail (895-2468-l), trunk floor and rear crossmember (870-1468). it's wise to replace this important part if you're...

High quality original gauge steel fits all body styles. welds to the bottom of the rear floor to provide mounting for rear leaf spring perch. Lh Rh= driver and passenger side applications: 1962-1967 Chevy Nova & Chevy II

High quality original gauge steel fits all body styles. welds to the bottom of the rear floor to provide mounting for rear leaf spring perch. Lh= driver side applications: 1962-1967 Chevy Nova & Chevy II

High quality original gauge steel fits all body styles. welds to the bottom of the rear floor to provide mounting for rear leaf spring perch. Rh= passenger side applications: 1962-1967 Chevy Nova & Chevy II

New standard duty kit contains 8 polyurathane rear shackle bushings, 4 shackles, 4 shackle bolts and nuts. For the driver and passenger side rear leaf springs. applications: 1967-1981 camaro 1967-1981 firebird & trans am  

These are the brackets that allow the front of the rear leaf springs to be attached, bolts to body as original. applications: 1967-1969 Camaro 1967-1969 Firebird 

New edp coated and die formed bracket located between the floor pan and the leaf spring front mounting bracket, and on the forward end of the rear frame rail. This brace is already welded to our complete 1 piece floor. Rh= passenger...

New edp coated and die formed bracket located between the floor pan and the leaf spring front mounting bracket, and on the forward end of the rear frame rail. This brace is already welded to our complete 1 piece floor. Lh= driver...

New brackets that allow the front of the rear leaf springs to be attached, bolts to body as original. applications: 1970-1981 Camaro 1970-1981 Firebird

New heavy gauge reproduction torque box welds to the rear seat floor pan, the spring perch bolts onto this piece. Rh= passenger side applications: 1970-1981 Camaro 1970-1981 Firebird

New heavy gauge reproduction torque boxes welds to the rear seat floor pan, the spring perch bolts onto this piece. LH RH= driver and passenger side applications: 1970-1981 Camaro 1970-1981 Firebird

New heavy gauge reproduction torque box welds to the rear seat floor pan, the spring perch bolts onto this piece. Lh= driver side applications: 1970-1981 Camaro 1970-1981 Firebird

Rh= passenger side Applications: 1955-1957 Chevy Bel Air all models

Lh= driver side Applications: 1955-1957 Chevy Bel Air all models  

This kit is sold as a set for one truck. Heavy gauge like the original, remove rivets from existing hanger and simply bolt up the new one, kit includes shackles and all hardware. Lh Rh= driver and passenger side applications: 1988-1998 Chevy & GMC...

This kit is sold as a set for one truck. Heavy gauge like the original, remove rivets from existing hanger and simply bolt up the new one. hardware included. Lh Rh= driver and passenger side applications: 1988-1998 Chevy & GMC Pickup 2WD C1500 C2500

this kit is sold as each please order 2 per truck. heavy steel gauge includes mounting hardware. Correct for 1988-97 will work for 1998 models. applications: 1988-1998 Chevy & GMC Pickup  4 WD K1500 K2500 K3500

Heavy steel gauge like original, includes mounting hardware. Will not fit 1500HD models Fits driver or passenger side, order 2 per truck applications: 1988-2006 chevy & gmc pickup c/k 1500 2007 chevy & gmc pickup Classic 1500 1996-2007 express...

sold as each please order 2 per truck. heavy gauge like oe, remove rivets from existing hanger and simply bolt up the new one. mounting hardware included to mount to the frame, leaf spring bushing and bolt are not included. fits 2 door standard cab fits...

This driver side upper rear shock mount is easily replaced by removing the original rivets and attaching this new heavy steel gauge replacement. includes all mounting hardware. With Single Rear Wheel (does not fit dually) Lh= driver side included 2...

This passenger side upper rear shock mount is easily replaced by removing the original rivets and attaching this new heavy steel gauge replacement. includes all mounting hardware. With Single Rear Wheel (does not fit dually) Rh= passenger side...

this kit is sold as each please order 2 per truck. Heavy gauge like the original, remove rivets from existing hanger and simply bolt up the new one. hardware included. applications: 1988-1998 Chevy & GMC Pickup 2WD C1500 C2500

New heavy gauge replacement like original, mounting hardware included. Sold as a complete kit for the driver and passenger side. Will not fit 1500HD models. applications: 1999-2013 Silverado 1500 1999-2013 GMC Sierra 1500  

New heavy gauge replacement like original, mounting hardware included. Sold as each please order 2 per truck. Will not fit 1500HD models. applications: 1999-2009 silverado / sierra 1500 1999-2007 silverado / sierra classic 1500 2000-2013 suburban / yukon...

This leaf spring hanger supports the front of the rear leaf spring and the rear section of the front leaf spring and can be used on the driver or passenger side. Die stamped high quality replacement, this kit includes the four required per Jeep...

This leaf spring hanger supports the front of the rear leaf spring and the rear section of the front leaf spring and can be used on the driver or passenger side. Die stamped high quality replacement, sold as each four required per Jeep. applications:...

located at the rear of the rear leaf spring. 3 inch heavy gauge like oe, includes all hardware. applications: 1980-1991 ford pickup f250-f350 4wd 1992-1998 ford pickup f250hd-f350 4wd 1975-2007 ford econoline e-250-e-350 1980-1996 bronco fullsize 4wd

located at the front of the rear leaf spring on the driver or passenger side, order 2 kits per truck. 2 1/2 inch heavy gauge like oe, includes all mounting hardware. applications: 1980-1996 ford pickup f150 2wd

this kit is sold as each please order 2 per truck. mounting hardware included applications; 1995-2001 ford explorer 2002-2005 explorer 1997-2001 mercury mountaineer

The rear cross member behind the bumper.  The bumper brackets attach to this part.  Don't forget the extensions on each end which are sold separately (871-1067-P) applications: 1967-1969 barracuda 1967-1973 dart 1971-1973 scamp 1970-1973 duster...

The rear most cross member behind the back bumper.  Don't forget to include the extensions (871-1468-1L/R except Charger) & reinforcements (871-1468-2L/R) when you replace this piece. Note: your center hole may differ as chrysler made both round...

heavy gauge pre-assembled rear cross member includes both ends and reinforcements attached. 66 in. long. applications: 1968-1970 coronet & superbee 1968-1970 roadrunner / gtx / satellite / belvedere

Welds to each outer side of rear cross member (870-1468) and reinforces the area where the bumper brackets attach. If you're replacing a cross member you will need a LH/RH pair of these items. applications: 1968-1970 coronet 1968-1970 roadrunner / gtx /...

Welds to each outer side of rear cross member (870-1468) and reinforces the area where the bumper brackets attach. If you're replacing a cross member you will need a LH/RH pair of these items. applications: 1968-1970 coronet 1968-1970 roadrunner / gtx /...

center section only. this is the rear frame section that ties the two frames together, as well as where the bumper brackets bolt to. this is a full replacement. unit runs across the rear, and connects to the cross member extensions. applications:...

The rear most cross member behind the back bumper.  Don't forget to include the extensions (871-1468-1L/R except Charger) & reinforcements (871-1468-2L/R) when you replace this piece. Note: your center hole may differ as chrysler made both round...

Welded to the underside of the trunk floor behind the rear bumper, the last two body mounts to attach here. This will not fit station wagon models. applications: 1962-1965 Chevy II & Nova

die formed edp coated complete assembly includes front section, rear section and both lh & rh reinforcements. Fits 2 door and 4 door models. applications: 1968-1972 nova

behind rear bumper and attaches to tail light panel.  the bumper brackets mount to this part. cross rail (870-3068-1) welds to the bottom of this piece, so if you're doing work on tail light panel, trunk floor or rear of the car you will need both...

if you're making repairs to the rear of the body you will need this piece. attaches to the bottom of cross rail (870-3068), and to the rear of the trunk floor. applications: 1968-1972 nova

new detailed reproduction cross member located at the back of the car between the frame. applications: 1964-1967 chevelle & malibu 1964-1967 gto / lemans / tempest 1964-1967 skylark 1964-1967 cutlass

This authentically reproduced brace features all of the factory drainage holes as well as the correct flanges for a straightforward installation. Stamped from heavy-gauge steel, the brace fits at the rearmost section of the body, below the trunk pan and...